Star Wars Knights of the old Republic Ebon Hawk model kit 1/72nd 3d printed PLA

Description

This item is a 3D printed version of the Star Wars Knights of the old Republic Ebon Hawk. It is not game accurate. This is a kit item, meaning that you will receive the parts straight off of the 3D printer, and will have to assemble and do all of the finishing touches yourself.
DO NOT put PLA printed models in the sun or they will warp or even melt. Even if painted.
--TERMS--
3D printed props and prop kits are sold with a zero return, zero refund policy. 3d printed items, even finished items, will have small imperfections, period. Photos show you exactly what you're getting and please understand that while fairly durable, these props are meant as display items, and can be scratched or broken if mishandled. Any 3d works that require attribution by license are shipped with a small tag, naming the original designer.
Kits may come in colors other than what is pictured. They are printed using whatever color filament we have on hand at the time.
I recommend using 5 minute epoxy to glue the ship together, so you will have plenty of time to align the pieces.
Also I recommend using a 2 in 1 spray can filler and primer in very light coats and then wet sanding with fine grip sandpaper and repeat until you get the smooth finish you want.
This model needed support to print in several areas and will be rough in those areas. I recommend light sanding with various grit paper.
It comes with landing gear or landing doors for in flight, a turret, 6 laser cannons (2 for the turret and 4 for the two sides).
This ship is intended to be in 1/72nd, in scale with Bandai's 1/72nd Millennium Falcon or Fine Molds 1/72nd Falcon (Fine Molds is pictured).
It is printed in PLA at 0.16mm layer height with 8% infill.
I only make one of these big kits every month or so, as just the top half of this ship took 54 hours to print. There may be some lifting of the corners of the print but they can easily be filled.