-40%

Setchell Carlson Beacon Receiver 524 BC-1206 repaired and tested

$ 16.25

Availability: 68 in stock
  • Brand: Setchell Carlson
  • All returns accepted: ReturnsNotAccepted
  • California Prop 65 Warning: Please check state Prop 65 site
  • Modification Description: n/a
  • Modified Item: No
  • Country/Region of Manufacture: USA
  • Condition: Please carefully examine photos and read description to form you own decision as to the condition of the item. Any questions? Contact me for a quick reply. Thanks. Art - From NY

    Description

    Radio appears to work.  I had to replace a capacitor in order to get it to work.  I applied a 400kc carrier signal, modulated with a 1kc tone, to the antenna.  I observed a proper 1kc sine wave at the headphone jack.  I do not have a speaker or phones around to audibly test the radio.  As the photos show the circuitry is in very good condition.   This is the
    only
    testing performed;
    I cannot guarantee performance with an actual air signal.
    The photo does not show the replaced capacitor.  When you get the radio you will notice a bright yellow cap amidst the vintage ones.
    I could not find a paper capacitor to maintain the vintage look underneath.
    Sorry, no returns or refunds on this one.
    Schematics are readily available in PDF form on line at no charge.
    The info below is from the Radio Museum site:
    Country:
    USA
    Manufacturer / Brand:
    Setchell Carlson, Inc.; St.Paul (MN)
    Brand
    Year:
    1943
    Category:
    Military Receiver
    Valves / Tubes
    5: 14H7 14J7 14H7 14R7 28D7
    Main principle
    Superhet with RF-stage; ZF/IF 135 kHz; 2 AF stage(s)
    Tuned circuits
    7 AM circuit(s)
    Wave bands
    Wave Bands given in the notes.
    Details
    Power type and voltage
    Storage and/or dry batteries / 24-28 Volt
    Loudspeaker
    - For headphones or amp.
    Power out
    0.3 W (unknown quality)
    from Radiomuseum.org
    Model:
    Beacon Receiver 524 BC-1206
    - Setchell Carlson, Inc.; St.
    Material
    Metal case
    Shape
    Rack
    Dimensions (WHD)
    105 x 105 x 175 mm / 4.1 x 4.1 x 6.9 inch
    Notes
    Aircraft "Range Receiver" BC-1206, 195 - 400 kHz, not a direction finder but indicating if the aircraft was within range of a specific beacon or other station. 24 - 28V DC used for both heaters and anode voltage, very compact design for use in small aircraft.
    Carlson apparently also marketed the same radio under model number "524" for civil aviation.
    SHIPPING TIMES AND TERMS, INSURANCE RULES, SALES TAX, CUSTOMS
    Shipping quotes are for US customers in the 48 contiguous states only;
    I do NOT ship to AK PR HI or any of our possessions, territories, etc.
    Picking up your item is unfortunately not an option unless it is something that will require a trucker to ship.
    I will not ship overseas.  I will NOT use eBay's Global Shipping program; please do not ask.  I wil NOT accept a purchase from a buyer living in another country requesting shipping to a US address.
    THE LEGAL STUFF - AND IT'S *NOT* IN FINE PRINT
    Unless specifically stated all items are sold as is as shown without warranty and without warranty of suitability of use. Please be sure this item will meet your needs before bidding.
    I will not be held liable for any incidental, accidental, consequential or other damages related to the use or misuse of this item under any circumstances.
    Electronic test equipment often operates with fatally high power supply voltages.
    By purchasing this product you are telling me that you are qualified to keep yourself safe while owning, using, repairing or otherwise dealing with the item.   If you do not know the proper safety procedures for the use and service of this equipment do not buy it.
    I will not be liable
    for death, injury, loss of income, medical costs, or any other problem resulting from this purchase.
    I the seller take no responsibility for the accuracy, reliability, or future use of the product.
    The buyer agrees to indemnify and hold the seller harmless from all future utilization of the unit, equipment, part, information or device.
    I am not responsible for the installation, use, suitability, application or operation of any item I sell
    , and the buyer assumes all responsibility for safely handling,inspecting and verifying the operational quality and suitability to task of their purchases prior to putting them into service.
    The buyer expressly releases the seller from any and all liability arising from the purhase, ownership, use, installation or operation of the product.
    By bidding on this item the buyer agrees to the above rules and certifies that he is properly trained in and aware of all safety and environmental hazards posed by the storage use and disposal of this item, will follow all relevant laws and regulations regarding use and disposal of the item, and releases the seller from any and all possible claims and liability.
    Powered by SixBit's eCommerce Solution