KRC-4602, KLUHSMAN RACING LONG STAINLESS STEEL FUEL FILTER, 100 MICRON

Description

ORIGINAL KRC STAINLESS STEEL FUEL FILTER
(LONG ELEMENT ONLY)
KRC-4602
The patented stainless steel filters are used at 60 PSI for the fuel injected GM-LS1 engines and work the best for alcohol applications.
The micron on KRC's Stainless Fuel Filter is a 100 absolute. This is NOT a nominal rating like most filters. This is an Aircraft
Rating and is extremely precise. Our Stainless Filters keep the water out of gas and also work great for alcohol. KRC's Stainless Filters will stand the test of time and are truly "cleanable" unlike many pleated paper filters.
Paper filters are less expensive, don't last as long, and do not handle as well.
Our Stainless Filters flow approximately 5 gallons per minute at 12 PSI with 8AN fittings; well over 350 gallons per hours with a 10AN or 12AN. This filter will stand pressure of 500 PSI. Great for any fuel injection system which  will run about 65 PSI.
To Clean:
1.
Simply unscrew the cap that the filter is attached to and wipe
2.
Spray with carburetor cleaner or soak and blow out from the inside out. This can be done virtually forever because the mesh of the filter is so tight that very little trash can stick to it.
3.
Wipe the inside of the canister out. This is where most of the trash should collect. Not in the filter.
(Long Element ONLY)
We manufacture more sizes of fittings and combinations than anyone in our field!
If you are looking for a fuel filter with element installed, please check out our store for our full line of fuel filters and brackets!
We gladly combine shipments!  Our store hours are Monday thru Friday 8 am to 4:30 pm (excluding holidays)
SIMPLY THE BEST FILTERS ON THE MARKET FOR THE MONEY!